Performance |
Max pull | 100kN |
Max continuous pull | 90kN |
Speed at max pull | 2.5km/h |
Max speed | 5km/h |
Pull at max speed | 40kN |
|
Characteristics |
Groove number | 8 |
Bull-wheel diameter | 540mm |
Max rope diameter | 21mm |
Total weight | 4350kg |
Max diameter of rope reel | 1400mm |
Overall dimension (length*width*height) | 4500×2100×2450mm |
|
Main configuration |
Engine | Cummins |
Hydraulic pump | German Rexroth |
Main motor | German Rexroth |
Tail bracket hoisting motor | American Eton |
Operating handle | German Rexroth |
Speed reducer | German Rexroth |
Hydraulic meter | German |
|
Engine |
Diesel | 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged |
Cooling system | liquid |
Electrical system | 24V |
|
Hydraulic Transmission | Closed hydraulic circuit for step less speed variation in both
rotating directions. |
| This machine is provided with a pull pro-setting system that
maintains the pre-set pulling value (also when the speed is reduced
to "0") by automatically adjusting the operation speed according to
the friction and unexpected loads which may occur. |
|
Additional Devices | Lighting system for the trailer |
| Hydraulic rope clamp for reel change |
| Digital speed and meter counter (extra charge) |
| Swivel guide rope roller |
| Trailer for towing at max speed of 30 km/h |
| Extra shaft |
|
Configuration | Control instruments for hydraulic system and diesel engine |
| Hydraulic front stabilizer |
| Hydraulic dynamometer with set-point and automatic control of
maximum pull |
| Grounding connection point |
| On board reel winder with automatic level wind, suitable for
standard reel mod. 1100 and 1400 |
| Hydraulic oil cooling system |
|
Additional Devices | The chassis provided with Brake, back lights and mudguard, with a
single point lift to allow lifting with a crane. |
| Hydraulic system for drum stand control with flat face quick action
couplings |
| Lockable toolbox, Holding fixture for hose kit, Grounding plate,
Acoustic insulation |
| Cable and radio remote control fully replacing all controls at
machine panel. |
| Auxiliary Hydraulic system (700/1000 bar) for power pressing tool |
| Remote diagnosis via GSM network with GPS modem, Synchronization
system |
| Biodegradable hydraulic oil, Allowable tension indictor, Overload
tension alarm, First Aid Kit |
| Manufacturer's recommended tools. |
| Manufacturer's workshop maintenance manual, in English |
| Manufacturer's routine spares for five years' duty (filters, bulbs,
etc.). |
